HIKROBOT
HIKROBOT Digital Light controller (Constant current) MV-LE201-500W48-2TD
- Dimensions:
- 347.2 mm × 180 mm × 150.8 mm (13.7" × 7.1" × 5.9")
- Power consumption:
- 500 W
- Supply voltage:
- 48 V
- Ingress protection:
- IP30
Price and availability on request
Not sure which model fits?
A technical contact will review your application and recommend the right configuration.
Have your application reviewedDescription
Key Feature - Adopts constant current to improve light source stability. - Adopts buttons and display to have quick operations. - Supports using network interface to set parameters and manage the device. - Supports external trigger interface for different lighting modes. - Supports overcurrent, overload, overtemperature, short circuit protection.
Technical data
| Artikelnummer | MV-LE201-500W48-2TD |
|---|---|
| Type | Digital Light Controller，2 channel，500W/48V |
| Drive mode | Digital, constant current |
| Lighting mode | Continuous, strobe |
| Channel | 2-channel |
| Dimming mode | Control panel (via pressing button), software (serial port or network interface) |
| Brightness level | 0 to 255 |
| Lighting response time | < 10 μs |
| Trigger mode | External trigger and internal trigger |
| Communication protocol | UDP, Serial |
| Applicable product | Line scan light (with 19M-8H and 19M-8A connector) Vcsel line scan light only supports connection to a single channel. |
| Input voltage | 100 VAC to 240 VAC, 50 Hz/60 Hz |
| Input current | 5.3 A (115 VAC), 2.65 A (230 VAC) |
| Output voltage | 48 VDC |
| Output current | Max. 10 A |
| Output power | Max. 500 W |
| Output current for each channel | Max. 8 A |
| Trigger in | High level 4.5 VDC to 24 VDC, low level 0 VDC to 2 VDC |
| Trigger out | High level 10 VDC to 24 VDC, low level 0 VDC to 2 VDC |
| Power supply interface | C13 220 VAC interface |
| Console interface | RJ45 network interface, DB9F serial port |
| Digital I/O | Opto-isolated input × 2, opto-isolated output × 2 |
| Lighting output connector | 19M-8H (Female) × 2 |
| Dimension | 347.2 mm × 180 mm × 150.8 mm (13.7" × 7.1" × 5.9") |
| Shell material | Plastic + SECC |
| Weight | 5000 g (11.0 lb.) |
| Temperature | Working temperature: 0 °C to 40 °C (32 °F to 104 °F) Storage temperature:–20 °C to 60 °C (–4 °F to 140 °F) |
| Humidity | 20% RH to 85% RH (no condensation) |
| Ingress protection | IP30 |
| Cooling mode | Fan cooling |
| Certification | CE, KC |
Documents
- Download datasheet
Datasheet HIKROBOT Digitaler Lichtregler (Konstantstrom) MV-LE201-500W48-2TD
Datasheet · DE · 803 KB
- Download
Technical drawing HIKROBOT Digitaler Lichtregler (Konstantstrom) MV-LE201-500W48-2TD
Technical drawing · DE · 13903 KB
- Download
Software / Firmware V1.0.11 HIKROBOT Digitaler Lichtregler (Konstantstrom) MV-LE201-500W48-2TD
Software / firmware · DE · 79 KB
- Download
Manual HIKROBOT Digitaler Lichtregler (Konstantstrom) MV-LE201-500W48-2TD
Manual · DE · 2992 KB