di-soric
di-soric UGUTI-670-G6-B5
- Operating principle:
- Ultrasonic
- Design:
- Fork
- Switching output:
- Push-pull (2x), NO/NC, switchable
- Supply voltage:
- 18 … 30 V DC
- Connection:
- Connector, M12
- Ingress protection:
- IP 67
Price and availability on request
Not sure which model fits?
A technical contact will review your application and recommend the right configuration.
Have your application reviewedDescription
The innovative dual operating concept - either IO-Link or auto-teach - allows the UGUTI label sensors to be commissioned quickly.
- Detection of metallized film, transparent and paper labels
- Intuitive teach-in via membrane keypad, with fine adjustment
- High repeatability
- Short response time
- Rugged metal housing
- Large fork width and fork depth
- Remote teach with key lock function
- IO-Link parameters with IO-Link switch-on and switch-off delay
- Multi output (pin 2), stability (factory setting) / label detected
- Parallel operation, pin 2 / label detected and IO-Link (pin 4)
Technical data
| Part number | UGUTI-670-G6-B5 |
|---|---|
| Operating principle | Ultrasonic |
| Supply voltage | 18 … 30 V DC |
| Idle current (max.) | 40 mA |
| Isolation voltage | 500 V |
| Housing length | 90 mm |
| Housing material | Aluminium (black, anodized) |
| Protection class (electrical) | III, Operation on safety extra-low voltage |
| Evaluation | digital |
| Design | Fork |
| Special features | Steckerabgang nach hinten |
| Product series | UGUTI ultrasonic |
| Switching output | Push-pull (2x), NO/NC, switchable |
| Switching function | Normally open (NO), Normally closed (NC) |
| Interface | IO-Link (V1.1, COM2 38.4 kBd, Smart Sensor Profile) |
| Indicator | LED green - Status, yellow - switching output, red - insufficient stability |
| Response time | 0.25 ms |
| Operating temperature | 0 … +60 °C |
| Ingress protection | IP67 |
| Connection | Connector, M12, 5-pin |
Documents
- Download datasheet
Datasheet di-soric UGUTI-670-G6-B5
Datasheet · DE · 1029 KB