Skip to content
Phone: +49 (0) 4101 805 0028
VISIONTECHNIK0
di-soric US-Q12-M-400-HP-G3-T4

di-soric

di-soric US-Q12-M-400-HP-G3-T4

Operating principle:
Ultrasonic
Design:
Cuboid
Detection range:
40 … 400 mm
Switching output:
Push-pull, 150 mA, NO/NC, switchable
Supply voltage:
18 … 30 V DC
Connection:
Connector, M8
Ingress protection:
IP 67

Price and availability on request

Not sure which model fits?

A technical contact will review your application and recommend the right configuration.

Have your application reviewed

Description

The US-Q12 is the compact class in a cubic design with a shallow mounting depth. Equipped with an IO-Link interface, the sensor can be operated in switching or measuring mode. It is used for short distances; sensitivity is set easily by teach-in, potentiometer or IO-Link.

- IO-Link

- Background suppression

- Adjustable operating range

- Shallow mounting depth

- Very narrow detection lobe / small blind zone

- Switching function NO/NC selectable

- Insensitive to dirt

- Small design

- Sturdy metal housing

- Degree of protection IP 67

Technical data

Part numberUS-Q12-M-400-HP-G3-T4
Supply voltage24 V DC (Regelbereich 18 - 30 V DC)
Operating principleUltrasonic
Idle current (max.)40 mA (24 V DC)
Reverse polarity protectionYes
Short-circuit protectionYes
Isolation voltage500 V
Housing length82 mm
Housing materialAluminium (black, anodized)
MaterialEpoxidharz, PUR (Wandleroberfläche)
Weight30 g
Protection class (electrical)III, Operation on safety extra-low voltage
Evaluationdigital
DesignCuboid
Special featuresIO-Link
Switching outputPush-pull, 150 mA, NO/NC, switchable
Switching functionNormally open (NO), Normally closed (NC)
Voltage drop (max.)2 V
InterfaceIO-Link (V1.1, COM2 38.4 kBd, Smart Sensor Profile)
Detection range40 … 400 mm
Standard target100 x 100 mm
Switching hysteresis (max.)2 … 20 mm (adjustable via IO-Link)
IndicatorLED green - Status, 1x yellow - switching output
Switching frequency< 10 Hz
Operating temperature-25 … +70 °C
Ingress protectionIP67
ConnectionConnector, M8, 4-pin

Documents