OPT
OPT-LPE2-007-01
Manufacturer part number: OPT-LPE2-007-01
Integrated 3D camera design—no external controller required, operates independently for simple and rapid deployment.
Price and availability on request
We quote the price individually per inquiry, based on configuration and quantity.
Not sure which model fits?
One of our staff will review your application and recommend the right configuration.
Have your application reviewedDescription
**OPT-LPE2-007-01** von OPT Machine Vision.
**Produkthighlights**
- Integrated 3D camera design—no external controller required, operates independently for simple and rapid deployment. - Cost-effective with up to 3,200 profile points on the X-axis, delivering higher precision and finer reproduction of product contours. - Equipped with a high-performance chip and FPGA edge acceleration technology, achieving a maximum frame rate of 18 kHz to support high-speed point cloud data acquisition and output. - HDR functionality, combined with anti-vibration interference correction and post-processing algorithms, ensures superior contour accuracy and adaptability for scanning products with varying background colors. - Complete hardware-software solution—all 3D sensors are compatible with OPT's full-featured algorithm platform, Smart3, - enabling zero-code, visual graphical programming for fast deployment of 3D project applications. - Compliant with GigE Vision 2.0 protocol, GenICam standard, and certified for EMC and RoHS.
Technische Daten und Unterlagen siehe unten. Preis und Lieferzeit auf Anfrage.
Technical data
| Manufacturer part number | OPT-LPE2-007-01 |
|---|---|
| referencedistance(cd) | 65 mm |
| z-axisrange(fs) | 39972 mm |
| x-axiswidthnearend | 52208 mm |
| x-axiswidthstandard | 59444 mm |
| x-axiswidthfarend | 69284 mm |
| Reference Distance(CD) | 65 mm |
| Z-axis Range(FS) | 39972 mm |
| X-axis Width Near End | 52208 mm |
| X-axis Width Standard | 59444 mm |
| X-axis Width Far End | 69284 mm |
| Z-axis Repeatability | 0.4μm |
| X-axis Repeatability | 3μm |
| X-axis Data Interval | 16–22μm |
| X-axis Profile Points | 3200 points |
| Z-axis Linearity | ±0.03% * FS |
| Scanning Speed(Frame Rate) | 2000–18000 Hz |
| Laser Wavelength | 405 nm |
| Laser Safety Class | Class 2 |
| Laser Output Power | 6 mW |
| Housing dimensions | 150.5 × 94 × 53 |
| Weight | 1041 |
| Operating temperature | 0-50°C |
| Lagertemperatur | -20-70°C |
| Operating Humidity | 35%~85% non-condensing |
| ESD ProtectionESD | Contact discharge 4 kV, air discharge 8 kV, compliant with IEC61000-4-2 |
| EFT ProtectionEFT | Power port 2 kV/5 kHz or 100 kHz, signal port 1 kV/5 kHz or 100 kHz, compliant with IEC61000-4-4 |
| Vibration(Environmental Durability) | Frequency 1-2500 Hz, max amplitude ±25.5 mm, max velocity ±2 m/s, RMS acceleration 3 g, 2 hours random vibration in X, Y, Z directions |
| Enclosure Protection Rating | IP55, compliant with IEC60529 |
| Typical Power Consumption(W) | 17.5 W (24 VDC full power operation at room temperature) |
| Power Supply Requirements | 24 VDC power supply |
| Ein-/Ausgänge | 2 optocoupler inputs, 3 optocoupler outputs |
| Supporting Software | 3D sensor client software OPT LPViewer, supporting algorithm platform software Smart3 |
| Operating System Requirements | Windows 7/10 32/64-bit, Windows 11 64-bit (recommended 8 GB RAM, i5 or equivalent processor) |
| Secondary Development System Support | Linux/Windows |
Documents
- Download datasheet
Series LPE2 Line Laser Profiler
Datasheet · EN
- Download
17010100027-OPT-LPE2-007-01-V1.0
Technical drawing · EN
- Download
OPT LP Viewer_V3.2.0.0_Windows_x64_Fix20250820_Setup
Software / firmware · EN
- Download
OPT-3D Sensor hardware specification V3.1.0.1
Manual · EN
- Download
OPT LP Viewer Software Manual V2.0
Manual · EN