Skip to content
Phone: +49 (0) 4101 805 0028
Book an appointment
DeutschEnglish
VISIONTECHNIK0
Hikrobot Zeilenkamera MV-CL082-92CM

HIKROBOT

HIKROBOT Line scan camera MV-CL082-92CM

Resolution:
8K Zeilenkamera (8192 × 2)
Interface:
Camera Link, GenICam
Frame rate:
20 kHz (Base), 40 kHz (Medium), 80 kHz (Full), 100 kHz (80-bit)
Pixel size:
7 μm
Color/mono:
Mono
Sensor:
CMOS
Lens:
F-Mount via Adapter möglich
Ingress protection:
IP40
The manufacturer has announced end of life (EoL preparation) for this product. It is still regularly orderable; we will inform you in good time once a successor has been confirmed.

End of life announced - still orderable

Not sure which model fits?

A technical contact will review your application and recommend the right configuration.

Have your application reviewed

Description

Key Feature - Supports multiple exposure and image acquisition modes. - Adopts multiple ISP technologies and supports manual adjustment for Gamma correction, FFC correction, LUT, black level, etc. - Supports ROI to increase line rate (max. 200 kHz in 1-line mode). - Supports bi-directional I/O wiring for flexible input/output settings. - Compact design and flexible installation. - Compatible with Camera Link Protocol and GenlCam Standard.

Technical data

ArtikelnummerMV-CL082-92CM
Type8k pixels Linescan Cameras.Camera Link,Mono
Sensor typeCMOS
Pixel size7 μm
Resolution8192 × 2
Image modeSupports 1-line, 2-TDI
Max. line rate20 kHz (Base), 40 kHz (Medium), 80 kHz (Full), 100 kHz (80-bit)
Configuration modeBase, Medium, Full, 80-bit
Tap geometry1 × 2, 1 × 4, 1 × 8, 1 × 10
Tap number2 Taps, 4 Taps, 8 Taps, 10 Taps
Pixel clock40 MHz, 66 MHz, 80 MHz, 85 MHz
Dynamic range63.4 dB
Mono/colorMono
SNR40.8 dB
GainSupports 1.0 ×
Exposure time3 μs to 10 ms
Exposure modeOff/ Once/ Continuous exposure mode; supports fixed time exposure, trigger-width exposure
Pixel formatMono 8/10/12
BinningSupports 1 × 1, 2 × 2, 4 × 4
Reverse imageSupports horizontal reverse image output
Trigger modeExternal trigger, internal trigger
External trigger modeLine trigger, frame trigger, line + frame trigger
Data interfaceCamera Link (SDR connector); USB interface for updating firmware
Digital I/O12-pin P10 connector provides power and I/O: configurable input/output × 4 (Line 0/1/3/4) and support single-ended/differential. Camera Link provides I/O (CC1/CC2/CC3/CC4).
Power supply12 VDC to 24 VDC
Power consumptionTyp. 9.8 W @ 12 VDC
Lens mountM72*0.75, flange back length 12 mm, applicable to F-mount via lens adapter
Dimension76 mm × 76 mm × 42.1 mm (3.0" × 3.0" × 1.7")
WeightApprox. 320 g (0.7 lb.)
Ingress protectionIP40 (under proper lens installation and wiring)
TemperatureWorking temperature: –20 °C to 55 °C (–4 °F to 131 °F) Storage temperature : –30 °C to 80 °C (–22 °F to 176 °F)
Humidity5% RH to 90% RH (no condensation)
Client softwareMVS and frame grabber software meeting with Camera Link Protocol
Operating system32/64-bit Windows 7/10, 64-bit Windows 11
CompatibilityCamera Link V1.2, GenICam
CertificationCE, RoHS2.0, KC

Dimensional drawing

Maßzeichnung Hikrobot Zeilenkamera MV-CL082-92CM

Documents

  • Datasheet Hikrobot Zeilenkamera MV-CL082-92CM

    Datasheet · DE · 518 KB

    Download datasheet

  • Technical drawing Hikrobot Zeilenkamera MV-CL082-92CM

    Technical drawing · DE · 774 KB

    Download

  • Software / Firmware V4.0.1 Hikrobot Zeilenkamera MV-CL082-92CM

    Software / firmware · DE · 2910 KB

    Download

  • Manual Hikrobot Zeilenkamera MV-CL082-92CM

    Manual · DE · 4363 KB

    Download